+(86) 133 2800 8563
Wuzhong District, Suzhou, Jiangsu, China
Stay connected:
Guangu Magnetic Deburring Polishing Machine

Magnetic polishing machine

There are many related equipment of magnetic polishing machine. The classification and main characteristics of the next batch of equipment on the market are briefly analyzed as follows:

The magnetic polishing machine lacks new product innovation and comparison with traditional magnetic deburring machines. Polishing and deburring of inner holes, dead corners, and small gaps of metal workpieces is significantly better. Average, high-frequency rotating magnetic field distribution, the polishing effect is more uniform, the surface of the object is more lubricated, and the cleaning effect is also achieved.

Use the average magnetic field distribution and magnetic induction effect to attack the magnetic polishing machine, so that the magnetic needle and the workpiece can be polished at various angles, and go to the dead corner as soon as possible after arrival, remove the burrs and mark the front side, and have a cleaning effect. Especially with regard to irregular shapes and porous gaps, such as internal thread and external thread workpieces, it is shown that they will not damage the surface of the workpiece, nor will it affect the accuracy of the workpiece.

The polishing machine is mainly used for: bicycles, various die-casting parts, stamping parts, sheet metal parts, hardware, furniture hardware, clothing luggage hardware, glasses accessories, instrumentation, bearings, music equipment, metal fishing gear, instrumentation, handicrafts, daily necessities , Watch accessories, locks, electronic accessories, hand tools (wrenches, sockets, nozzles, etc.), various jewelry, jewelry, powder metallurgy, resin and other parts.

The magnetic deburring machine throws out the workpiece, and the insoluble metal is immersed in the electrolytic tank. The metal surface that is selectively dissolved and picked up by the DC anode and negatively modified by ordinary current and electrolyte has a variety of shapes, which reduces the roughness of the metal surface, and then reaches the surface of the workpiece and becomes smooth. One of the main characteristics of electropolishing is selectivity. The surface of the workpiece is a non-linear wave from a microscopic point of view, and the part of the metal surface protruding the resistivity will be higher than the concave part, so the convex part will dissolve. Due to the increase in the number of recesses in the mold, it is too low, passivated, and difficult to dissolve. Therefore, it is the initial stage of the entire electrolytic surface treatment process. If the surface needs to be optically processed, it will be smooth after the mirror effect.

Guangu Magnetic Deburring Polishing Machine

Magnetic polishing machine manufacturers